Projeler
HEAT-INSULATION
IZOPOINT is used for internal and external construction features.
In the summer, it renders the microclimate cool, while keeping it comfortably warm in the winter
The energy costs are drastically lower compared to conventional insulation material.
WATERPROOF
In addition to its sound transmission minimizing properties, IZOPOINT is waterproof.
It remains waterproof even in case of capillary fractures.
For flat roof sealings the mixture may be prepared with a 3 x stronger water displacement effect.
Due to its breathability and special formulation, IZOPOINT can discard any penetrating water.
FIREPROOF
IZOPOINT is a non-inflammable material
Its outstanding insulation properties bring considerable benefits in public, private and tight-built constructions.
It does not expose you to any inflammable or carcinogenic gas oscillation.
It is fireproof up to temperatures of 1500°C
It is a product from the inflammability class A1 (A1 - Klasse)
PREVENTION OF SOUND TRANSMISSION
25DB BEI (3CM/500HZ)
In all types of buildings IZOPOINT be used as additional sound insulation material.
Due to its ALL IN ONE property it offers considerable financial savings in public buildings, coherent building arrangements and in all occasions where otherwise, an additional sound insulation would need to be applied
COMPARISON CHART OF DIFFERENT COMPOSITE MATERIALS USED IN CONSTRUCTION WORK
EFFECTIVE LOAD
APPLICATION
EXAMPLE FOR FRONT APPLICATION
Preparation of the wall
-
The desired area needs to be free of fatty residues, dirt, dust and paint.
-
To free the surface of bricks, pumice stone and other materials from dust, it should be cleaned with water only.
-
Depending on the desired layer thickness, the suitable spacing strips are placed.
-
For the wall to be ready for application of the insulation material, it needs to be completely dry.
-
One package of IZOPOINT (8 kg) allows covering an area of 3 m2 with a thickness of 1 cm.
HINT:
IZOPOINT can be applied both with hands or a suitable device.
Preparation steps for IZOPOINT
-
Put 3 litres of water into a kettle
-
Add 1 package of IZOPOINT
-
Add the remaining 10 litres of water to the mixture
-
Mix the material with a stirring device for approx. 3 min (carefully mix from bottom to top).
-
Take a spatula to check for an optimal consistency of the mixture
-
Use up the entire mixture within 2 hours.
Needed material for the preparation of IZOPOINT:
-
Clean kettle with a minimum volume of 60 litres
-
1 package of IZOPOINT (8 kg)
-
13 litres of water
-
A stirring device with a doubled circulation of 800 – 1000 d/ min
-
Spatula
